Goods lift maintenance
Goods lifts work harder than most passenger lifts and get less attention. They need regular maintenance and a thorough examination at least once a year, priced after an engineer has seen the lift.

This is for you if
- You run a warehouse, factory, shop or kitchen with a goods lift
- Your mezzanine has a lift for stock or waste
- A service lift or dumb waiter has no contract
Look elsewhere if
- The lift is for people in a public building: see platform lifts or servicing contracts
Goods only, or goods and people?
This is the first thing to settle, because it changes the rules. A goods-only lift is designed to carry loads, not people. A goods passenger lift is built to carry both, so staff can travel with a trolley or pallet.
Look at the plate inside the car and the installation paperwork. If people are riding in a lift marked goods only, stop it now and talk to the lift company, because the lift was not built for it.
How often it has to be examined
Under regulation 9 of LOLER, lifting equipment has to be thoroughly examined by a competent person. The interval depends on what it lifts:
- Goods only: once a year or more often.
- Goods passenger lifts, or any lift that carries people: at least every six months.
- Either, if a written examination scheme sets its own intervals instead.
The examination is separate from maintenance. The maintenance company keeps the lift in good repair, as PUWER regulation 5 requires, and puts right what the examination finds.
Why goods lifts wear faster
A goods lift in a busy warehouse may run all day with heavy, uneven loads. Pallet trucks hit the gates, loads are pushed in off-centre and the doors get forced when someone is in a hurry. In other words, the parts that fail first are the ones people touch.
That's why you may find the engineer suggests more visits than you would expect for a passenger lift of the same age. Ask them to explain the number against how often the lift runs.
Goods lift on site with no contract, or a contract that never seems to fix it? Get an engineer’s view and a price.
Get a quoteKitchens, shops and mezzanines
Smaller lifts are easy to forget. Service lifts in restaurant kitchens, book lifts in libraries and stock lifts serving a mezzanine are all lifting equipment used at work. They need the same care: maintenance, a log of faults, and a thorough examination on time.
If you have taken on a unit with one of these and no paperwork, ask for a survey and an examination before it goes back into daily use.
What it costs
There are few published prices for goods lift contracts. The council figures we use for passenger lifts are on the lift maintenance cost page, but a goods lift is priced on its own type, age and use, so treat those as a rough guide. A written quote after a survey is the only firm number.
Setting up care for a goods lift
Know what it is
Goods only, or goods passenger: the plate in the car and the paperwork tell you.
Engineer’s survey
Gates, interlocks, drive and controller checked, and the use of the lift noted.
Visits set by use
A lift running all shift needs more visits than one used twice a week.
Examination booked
Yearly for goods only, twice a year where people ride, or to a written scheme.
Questions about goods lifts
How often does a goods lift need a thorough examination?
Lifting equipment that only moves goods must be examined under LOLER no less often than once every 12 months, unless a written examination scheme sets a different interval. If people ride in it, the interval is at least every six months.
Can staff ride in a goods-only lift?
Not if it is designed and marked as goods only. If people need to travel with loads, you need a goods passenger lift, which is examined at least every six months.
Do small service lifts in kitchens count?
Yes. Service lifts and dumb waiters are lifting equipment used at work, so they need maintenance and thorough examination like any other goods lift.
Does a mezzanine goods lift need a contract?
It needs maintaining and examining. A contract is the usual way to make sure that happens, and the engineer will set the visits by how often the lift runs.
What tends to go wrong on goods lifts?
Gates and door interlocks take a beating from trolleys and pallet trucks, and overloading wears ropes and drives. Ask the engineer what they see most on your type of lift.
Ask for a lift maintenance quote
We find a lift maintenance company that covers your building and give you their name before any of your details go to them. It costs you nothing.
- You tell us where the building is and what the lifts need.
- We name a company that covers your area and ask whether you want to hear from them.
- If you say yes, they arrange a survey of the lifts and send a written price.
Thank you, your enquiry is with us.
- We email or phone with the name of a lift maintenance company that covers the building.
- Your details go to them only if you tell us that is fine.
- They arrange to see the lifts and put their price in writing. We send no marketing.